Viewing WAN Information

The WAN Interface page displays information of the WAN interface.

➢

To view WAN information:

1.

Open the WAN Interface page (Setup menu > IP Network tab > Core Entities folder > WAN Interface).

2.

The Physical Interface Information group displays the following information if the cellular interface is used (read-only fields):

●

Name': Displays the name of the physical WAN interface.

●

'Type': Displays the type of physical interface (i.e., cellular).

●

'Description': Displays a description (if configured) of the physical WAN interface.

●

'Mode': Displays if one or two cellular Access Point Names (APN) are used (Single PDN or Multi PDN, respectively).

3.

The Interface Information group displays the following information (read-only fields):

●

'Name': Displays the name of the WAN interface.

●

'Description': Displays a description (if configured) of the WAN interface.

●

'Status': Displays the status of the WAN interface ("Connected" or "Disconnected").

●

'State Time': Displays the time since the WAN interface has been in the displayed status.

●

'IP Address': Displays the IP address of the WAN interface.

●

'Primary DNS Server IP Address': Displays the IP address of the primary DNS server (if configured).

●

'Secondary DNS Server IP Address': Displays the IP address of the secondary DNS server (if configured).

●

'Network': Displays the network type.